Multi-pattern Condenser Microphone

AT2050

  • Three switchable polar patterns: omni, cardioid, figure-of-eight
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • State-of-the-art surface-mount electronics ensure compliance with A-T'sstringent consistency and reliability standards
  • Dual large diaphragms are gold-vaporized and aged to achieve optimumcharacteristics over years of use




    • audio technica AT2050
  • AT2050 Specifications

    Element
    Externally polarized (DC Bias) condenser
    Polar Pattern
    Cardioid, Omnidirectional, Figure-of-8
    Frequency Response
    20-20,000 Hz
    Low Frequency Roll-Off
    80 Hz, 12 dB/octave
    Open Circuit Sensitivity
    -42 dB (7.9 mV) re 1V at 1 Pa
    Impedance
    120 ohms
    Maximum Input Sound Level
    149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
    Noise
    17 dB SPL
    Dynamic Range (Typical)
    132 dB, 1 kHz at Max SPL
    Signal-To-Noise Ratio
    77 dB, 1 kHz at 1 Pa
    Phantom Power Requirements
    11-52V DC, 3.8 mA typical
    Switch
    Pattern selection; Flat, roll-off; 10 dB pad (nominal)
    Weight
    412 g
    Dimensions
    52mm x 170mm (Maximum Body Diameter x Long)
    Output Connector
    Integral 3-pin XLRM-type
    Accessories Furnished
    AT8458 shock mount for ⅝”-27 threaded stands;
    ⅝”-27 to ⅜”-16 threaded adapter;
    soft protective pouch

    Download

    audio technica support AT2050_UM.pdf - AT2050 User Manual
    audio technica support AT2050_PI.pdf - AT2050 Product Information